石英的顺磁中心在电子自旋共振测年中的特性及应用

沉积物的电子自旋共振测年是利用石英矿物中的顺磁中心浓度确定总辐射能量,进而推定石英矿物的埋藏年代。石英中可用于测年的顺磁中心包括E’心、Al心、Ti心和Ge心。E’心需要经过热活化后才能测年。Al心是一种电子空穴心,在低温下可观测到较强的信号值。光照可以使Al心漂白,但有残留值存在。Ti心、Ge心都是电子中心,Ti心在低温测试中可见,信号微弱。Ge心光晒退最敏感,在常温观测中可见。不同顺磁中心的形成机理不同导致它们具有不同的特性,适用于不同沉积环境中的样品测年,在冰碛物中Ge心测年更具有可行性。电子自旋共振测试时降低温度可使信号增强,Ti心在10 K和15 K时信号强度最大;Al心在20 K时信号最强。Ge心在200 K时信号明显增强。在电子自旋共振测年中可根据不同顺磁中心信号强度的变化调整测试温度获得信号的最优值。在以后的ESR测试中可以选取信号最强时的测试温度进行测试,以增强微弱信号的信噪比,有利于对复杂的信号形态的分辨确定,提高对信号强度定量的准确性。     

A novel lipid droplets-targeting fluorescent probe based on dicyanisophorone and carbazole for Cu2+ and its application

A novel fluorescent probe, LCH , based on dicyanisophorone and carbazole, was prepared for the visual detection of Cu²⁺. The probe LCH could recognize Cu²⁺ by fluorescence quenching in EtOH/H₂O (1/4, v/v) solution, which could be easily identified under the 365 nm UV lamp, and the detection limit was as low as 0.785 μM. The recognition mechanism of probe LCH with Cu²⁺ was determined by combining ¹H NMR titration, MS, and theoretical calculations. Practical application experiments showed that probe LCH could be used to detect Cu²⁺ in the test strip experiments. Cell imaging experiments showed that the probe LCH owned good cell permeability and could be applied to the imaging of Cu²⁺ in HepG2 cells. In addition, fluorescence colocalization experiments showed that LCH could target lipid droplets. These results indicate that the probe LCH will have a good application prospect in environmental detection and clinical medicine.     

基于学科能力视角的江苏高考化学试题研究

以化学学科能力模型为依据,确定化学学科能力评价指标,并以此为基础,对2008-2020年江苏高考化学试题学科能力要求进行分析,得出江苏卷对于化学学科能力的考查特点及变化趋势,并提出了相关教学建议。     

吲哚/吲唑酰胺类合成大麻素检验方法研究进展

合成大麻素作为滥用最广泛、种类最多的新精神活性物质之一,严重影响人类身心健康和社会稳定,当前滥用较为严重,常出现在国内外各类案件的侦办中,是世界范围内关于新精神活性物质案件的一个研究焦点,建立合成大麻素的检验方法对侦破相关案件具有重要意义。近几年出现的吲哚/吲唑酰胺类合成大麻素被称为第八代合成大麻素,其涉案频繁但研究相对较少。本文介绍吲哚/吲唑酰胺类合成大麻素的结构、分类、毒性,并对其代谢和检验研究现状进行了综述,同时介绍了检测吲哚/吲唑酰胺类合成大麻素的探索思路,并对未来的发展方向进行了展望。     

Conventional and Organic Honeys as a Source of Water- and Ethanol-Soluble Molecules with Nutritional and Antioxidant Characteristics

The benefits of natural honeybee products (e.g., honey, royal jelly, beeswax, propolis, beevenom and pollen) to the immune system are remarkable, and many of them are involved in the induction of antibody production, maturation of immune cells and stimulation of the immune system. The type of plants in the geographical area, climatic conditions and production method have a significantly influence on the nutritional quality of honey. However, this variability can influence consumer liking by the sensory attributes of the product. The aim of this work was to compare the most popular honeys from Poland in terms of nutritional value, organoleptic properties and antioxidant activity. In the study, five varieties of honey (honeydew, forest, buckwheat, linden and dandelion) from conventional and organic production methods were tested. The nutritional characteristics of honey samples included acidity, content of water, sugars, vitamin C, HMF and phenolics (total and flavonoids), while honey color, taste, aroma and consistency were investigated in the organoleptic characteristics. The antioxidant activity was determined in water- and ethanol-soluble honey extracts using DPPH and ORAC tests. The results showed that organoleptic and nutritional characteristics of popular Polish honeys differ significantly in relation to plant source and production method. The significant effect of honey variety on the content of HMF, saccharose and phenolics, as well as acidity and antioxidant capacity were noted. The impact of variety and variety × production method interaction was significant in the case of the content of vitamin C, glucose and fructose. A visible difference of buckwheat and forest honeys from other samples was observed. The highest content of total phenolics with antioxidant activity based on the SET mechanism was found in buckwheat honeys, while forest honeys were richer in flavonoids.     

5-HT1A Serotonergic, α-Adrenergic and Opioidergic Receptors Mediate the Analgesic Efficacy of Vortioxetine in Mice

Vortioxetine is a multimodal antidepressant drug that affects several brain neurochemicals and has the potential to induce various pharmacological effects on the central nervous system. Therefore, we investigated the centrally mediated analgesic efficacy of this drug and the mechanisms underlying this effect. Analgesic activity of vortioxetine (5, 10 and 20 mg/kg, p.o.) was examined by tail-clip, tail-immersion and hot-plate tests. Motor performance of animals was evaluated using Rota-rod device. Time course measurements (30–180 min) showed that vortioxetine (10 and 20 mg/kg) administrations significantly increased the response latency, percent maximum possible effect and area under the curve values in all of the nociceptive tests. These data pointed out the analgesic effect of vortioxetine on central pathways carrying acute thermal and mechanical nociceptive stimuli. Vortioxetine did not alter the motor coordination of mice indicating that the analgesic activity of this drug was specific. In mechanistic studies, pre-treatments with p-chlorophenylalanine (serotonin-synthesis inhibitor), NAN-190 (serotonin 5-HT_1A receptor antagonist), α-methyl-para-tyrosine (catecholamine-synthesis inhibitor), phentolamine (non-selective α-adrenoceptor blocker), and naloxone (non-selective opioid receptor blocker) antagonised the vortioxetine-induced analgesia. Obtained findings indicated that vortioxetine-induced analgesia is mediated by 5-HT_1A serotonergic, α-adrenergic and opioidergic receptors, and contributions of central serotonergic and catecholaminergic neurotransmissions are critical for this effect.     

An integrated platform for gas-diffusion separation and electrochemical determination of ethanol on fermentation broths

An integrated platform was developed for point-of-use determination of ethanol in sugar cane fermentation broths. Such analysis is important because ethanol reduces its fuel production efficiency by altering the alcoholic fermentation step when in excess. The custom-designed platform integrates gas diffusion separation with voltammetric detection in a single analysis module. The detector relied on a Ni(OH)₂-modified electrode. It was stabilized by uniformly depositing cobalt and cadmium hydroxides as shown by XPS measurements. Such tests were in accordance with the hypothesis related to stabilization of the Ni(OH)₂ structure by insertion of Co²⁺ and Cd²⁺ ions in this structure. The separation step, in turn, was based on a hydrophobic PTFE membrane, which separates the sample from receptor solution (electrolyte) where the electrodes were placed. Parameters of limit of detection and analytical sensitivity were estimated to be 0.2% v/v and 2.90 μA % (v/v)⁻¹, respectively. Samples of fermentation broth were analyzed by both standard addition method and direct interpolation in saline medium based-analytical curve. In this case, the saline solution exhibited ionic strength similar to those of the samples intended to surpass the tonometry colligative effect of the samples over analyte concentration data by attributing the reduction in quantity of diffused ethanol vapor majorly to the electrolyte. The approach of analytical curve provided rapid, simple and accurate analysis, thus contributing for deployment of point-of-use technologies. All of the results were accurate with respect to those obtained by FTIR method at 95% confidence level.     

有机相变材料的发展及在纺织领域的应用

相变材料因为其优良的热性能,被广泛应用于纺织品、航空航天、交通运输、农业、国防、建材、太阳能系统和医疗设备等领域。近年来,开发应用新型相变材料已经成为研究热点。本文首先概括介绍了相变材料发展进程,着重介绍了有机相变材料,包括它的分类、性能和应用。详细介绍了有机相变材料在纺织行业的应用,以及对调温纺织品测试手段的研究和建立的相关数学模型的建立。     

延性材料平面冲击波基本实验数值模拟的若干问题

假设屈服强度正比于剪切模量,分别构建了四种强度模型,并用于数值模拟Ly12铝的平面冲击波试验的质点速度剖面以及钨合金的平面冲击波试验的锰铜计应力记录.研究发现,基于Steinberg等的屈服强度模型比较符合实验.还对平面冲击波试验的层裂现象进行了简化的数值模拟,其中,采用了该文作者所提出的一种基于空穴聚集的层裂模型,该模型的特点是分别引入了层裂过程的早期及后期应力松弛方程.     

一种用于金属薄板轴向拉压疲劳试验的防弯夹具

在金属薄板的轴向疲劳S-N曲线测试中,研究将一种侧向防弯曲夹具应用于存在压向载荷的试验。通过粘贴应变片方法测量试样的表面应力,对试样的受力情况做了定量的分析。测量结果表明试样安装防弯曲夹具后,基本消除了由压缩失稳产生的弯曲应力。且通过对不同拧紧方式的测量,表明一定的夹紧力下不对试验力产生影响。试验夹具设计成对试样中心轴线的支撑而让边缘疲劳敏感部位处在非接触状态,试样断口表明疲劳起源在这些并没有与试样接解的部位。用钛和铝两种材料的薄板在不同试验机上进行了不同寿命和频率的试验,试验结果与正应力比试验同时给出以对比,各种研究表明本试验有效解决了薄板疲劳受压时的失稳问题。